General第 112 / 120 题
A torque wrench is used to:
a.Tighten fasteners to a specified value
b.Measure bore diameter
c.Test battery voltage
d.Check tire tread depth
解析
A torque wrench applies a controlled, specified amount of tightening force so fasteners are neither loose nor overtightened. Proper torque is critical for head bolts, wheels, and many other parts. The wrench should be set back to its lowest setting when stored to preserve calibration.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- An outside micrometer is used to measure:
- Technician A says wheel lug nuts can be tightened in any order. Technician B says they should be tightened in a crisscross (star) pattern to the specified torque. Who is correct?
- Technician A says a vehicle should be supported at the manufacturer's designated lift points. Technician B says rated jack stands should support a vehicle before working underneath it. Who is correct?
- Technician A says a dial indicator measures runout, endplay, and gear backlash. Technician B says it must be set up perpendicular to the surface for an accurate reading. Who is correct?
- A vehicle's service information (repair manual) is the best source for:
- If a bolt must be torqued to 90 foot-pounds and the specification then calls for an additional 90-degree turn, this method is known as: