Safe Driving第 48 / 120 题
Why should you never start across a railroad crossing unless you are certain you can clear it completely?
a.Because crossing gates close automatically after 10 seconds
b.Because state law requires a permit
c.Because the crossing surface damages tires
d.Because a long, heavy vehicle can become trapped on the tracks with no room to move forward or back
解析
Traffic backed up on the far side can leave a long vehicle stopped on the rails with nowhere to go, so you must have room on the other side before you start. Gates do not operate on a fixed 10-second timer, no permit is required for a normal crossing, and tire damage is not the reason for the rule.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- Your drive wheels begin to skid when you brake hard on a slick surface. What is the correct recovery?
- You are steering into a corner and the front end pushes straight ahead instead of turning. What is the most likely cause of this front-wheel skid?
- You are driving a placarded hazardous materials load and approach an unguarded railroad crossing. What must you do?
- You are entering a highway work zone with reduced lanes and workers present. What is the correct driving behavior?
- You are about to change lanes on a busy interstate. What is the correct communicating procedure?
- You must stop on the shoulder of a divided highway because of a mechanical problem. Where do you place your warning devices?