Installation第 45 / 110 题
The condensate drain line from a cooling coil is often fitted with a trap to accomplish what?
a.Add refrigerant
b.Prevent air from being pulled through the drain and allow proper condensate flow
c.Increase blower speed
d.Filter the return air
解析
A properly sized trap on a draw-through coil prevents the blower's negative pressure from either holding water in the pan or pulling air backward through the drain. This allows condensate to flow freely to the drain. The trap depth is based on the unit's static pressure.
免费刷完整 110 道题库 — 无需注册。
同考点相关题目
- When installing a split-system condenser, adequate clearance around the unit is needed mainly to ensure what?
- A furnace installed in an upflow configuration discharges heated air in which direction?
- A furnace located in an attic generally requires what for code-compliant service?
- What is the recommended practice for supporting horizontal refrigerant and drain lines?
- Before releasing refrigerant charge into a newly installed line set, the system should be tested and then processed how?
- A gas furnace flue must terminate where?