Service & Troubleshooting第 87 / 110 题
A capacitor that reads well below its rated microfarad value should be treated how?
a.Left in service
b.Replaced with one of the correct rating
c.Charged with refrigerant
d.Bypassed with a jumper
解析
A capacitor measuring significantly below its labeled microfarad rating is weak and cannot deliver the needed phase shift, causing hard starting, overheating, and high amp draw. It should be replaced with a capacitor of the same voltage and microfarad rating. Never bypass a required capacitor.
免费刷完整 110 道题库 — 无需注册。
同考点相关题目
- A furnace that heats briefly then shuts off repeatedly before satisfying the thermostat is exhibiting what?
- A dirty flame sensor on a modern furnace most commonly causes what symptom?
- When measuring the actual airflow of an installed system, which measurement helps diagnose a restrictive duct system?
- Recommended routine maintenance to preserve airflow and efficiency includes what?
- A technician measuring compressor amp draw far above the rated load amps (RLA) should suspect what?
- The most likely cause of no cooling when the thermostat calls but the outdoor unit is completely silent is what?