Application第 66 / 100 题
What is 'cutting in' when painting a room?
a.Cutting the roller cover to size
b.Brushing a clean border along edges, corners, and trim that the roller cannot reach
c.Scoring the wall with a knife
d.Thinning the paint by half
解析
Cutting in uses a brush to paint the edges along ceilings, corners, baseboards, and around trim where a roller cannot go cleanly. The rolled field is then blended into the cut-in border while still wet. Neat cut-in lines are a hallmark of quality work.
免费刷完整 100 道题库 — 无需注册。
同考点相关题目
- What is the correct spray technique for keeping film thickness uniform?
- When brushing trim, why is 'tipping off' with light strokes at the end helpful?
- Why should each coat be allowed to dry for the manufacturer's recommended recoat time before the next coat?
- Why is adequate ventilation and lighting important during interior application?
- A specification calls for 5 mils wet film thickness. Which tool confirms this during application?
- What commonly causes 'brush marks' (ridges) to remain in a dried brushed finish?