安全第 1283 / 1605 题
A tag applied during tagout must:
a.Be optional if a lock is used
b.Be removed at the end of each shift regardless of status
c.Be attached to warn against operating the equipment and not be removed by anyone other than authorized personnel
d.Be a plain piece of paper with no words
解析
1926.417 requires tags to warn against energizing/operating equipment. Only authorized personnel may remove locks/tags, ensuring the servicing worker controls when the energy is restored.
法律依据: 29 CFR 1926.417(b)免费刷完整 1605 道题库 — 无需注册。
同考点相关题目
- On construction sites, which system is required to protect workers using 120-volt, single-phase, 15- and 20-amp receptacle outlets not part of the permanent wiring?
- Before using or handling any electrical equipment or cords, workers should:
- For cranes and equipment operating near overhead power lines up to 50 kV, what minimum clearance is generally required if the line is not de-energized and grounded?
- Head protection (hard hats) is required on a construction site whenever there is a possible danger of:
- Under OSHA's PPE rules, who generally must pay for required personal protective equipment?
- A worker is grinding metal, creating flying particles. What PPE is specifically required?