EKG Acquisition第 47 / 100 题
What does the standardization mark on an EKG tracing indicate when it is 10 mm tall?
a.The machine is calibrated so that 1 millivolt produces a 10 millimeter deflection
b.The paper is running at 10 millimeters per second
c.The patient's voltage is 10 times normal
d.Each large box represents 10 milliseconds
解析
Standard calibration is 10 mm per millivolt, printed as a rectangular standardization mark two large boxes tall at the start of the tracing, so that amplitudes can be compared between machines and over time. Paper speed is a separate setting of 25 mm/sec. The mark says nothing about the patient's own voltage, and each large box represents 0.20 second, not 10 milliseconds.
免费刷完整 100 道题库 — 无需注册。
同考点相关题目
- A tracing shows a uniform, thick, fuzzy baseline with small spikes occurring exactly 60 times per second across all leads. What is the most likely cause?
- An anxious, cold patient produces a tracing with irregular jagged spikes that obscure the small waveforms. What artifact is this and what is the best first correction?
- A tracing shows the baseline slowly drifting up and down in a wave pattern that matches the patient's breathing. What should the technician check first?
- At the standard paper speed, how much time does one small box represent, and what is that speed?
- How much time and voltage does one large box on standard EKG paper represent?
- A patient has a hairy chest and oily skin. What is the correct skin preparation before applying chest electrodes?