Fixtures & Water Heaters第 74 / 120 题
A shower compartment is framed 32 inches by 32 inches inside the finished walls. Does it meet the minimum area and minimum dimension requirements for a shower?
a.Yes, 1,024 square inches meets the area minimum and 32 inches exceeds the 30 inch dimension minimum
b.No, the area is 1,024 square inches but 1,200 square inches is required
c.No, the minimum interior dimension is 36 inches in every direction
d.Yes, but only if a 30 inch wide door is installed
解析
32 times 32 equals 1,024 square inches, which is exactly the minimum area, and each interior dimension of 32 inches clears the 30 inch minimum. The area minimum is 1,024 square inches, not 1,200, and there is no universal 36 inch interior dimension for a standard shower. Shower doors must provide a 22 inch clear opening, so a 30 inch door is not the condition that makes the stall compliant.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- A 120,000 Btu/h gas water heater draws all of its combustion air directly from outdoors through two vertical ducts. Using the 1 square inch per 4,000 Btu/h rule for vertical ducts, what is the required free area of each opening?
- A 100,000 Btu/h water heater is placed in a closet and will take combustion air from inside the building only. Using the rule of thumb of 50 cubic feet of room volume per 1,000 Btu/h, what minimum volume of communicating space is needed?
- Where an enclosure takes combustion air from an adjacent room through two permanent openings, where must those openings be located?
- An indirect waste pipe from a commercial ice machine is 1-1/2 inches in diameter and discharges into a floor sink. What is the minimum required air gap?
- A 3/8 inch indirect waste tube from a beverage dispenser discharges over an open receptor. Applying the air gap rule, what is the required air gap?
- A laundry standpipe for a residential clothes washer is roughed in with the top of the standpipe 14 inches above the trap weir. Is the installation acceptable?