Gas Piping第 94 / 120 题
The same 3 psi test is applied to the piping with a mechanical gauge. What is the minimum time the pressure must be held without any loss?
a.10 minutes
b.5 minutes
c.30 minutes
d.24 hours
解析
The test duration must be at least 10 minutes, or longer if the code official or the size of the system requires it, with no drop in pressure. Five minutes is too short to satisfy the minimum, and 30 minutes and 24 hours exceed what the code requires for a standard residential test.
法律依据: IFGC §406.4.1免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- On which of the following appliances does the IFGC NOT require a sediment trap ahead of the appliance control valve?
- A corrugated stainless steel tubing (CSST) gas system is installed in a two-story house. What is the minimum size of the copper bonding jumper used to bond the CSST system to the electrical service grounding electrode system?
- A new residential gas piping system will operate at a working pressure of 7 in w.c. (about 1/4 psi). What is the minimum test pressure required for the pressure test?
- Which practice is correct when pressure testing a fuel gas piping system?
- A gas range is connected with a listed appliance connector that runs 4 ft from the shutoff valve to the range. Which statement about this installation is correct?
- Which material is permitted for a buried gas service line running from an outdoor meter to a detached garage, but is prohibited for the piping inside the garage?