Dispensing第 72 / 100 题
When dispensing polycarbonate, which coating is nearly always added and why?
a.A mirror coat for style
b.A scratch-resistant (hard) coating because polycarbonate is soft
c.A polarized film
d.A photochromic dye
解析
Polycarbonate has a soft surface that scratches easily, so manufacturers apply a scratch-resistant hard coating to protect it. AR is also commonly added for its otherwise reflective surface.
免费刷完整 100 道题库 — 无需注册。
同考点相关题目
- To fit a frame that is too tight and leaves marks on the temples, the optician should do what?
- A patient with a strong Rx wants the thinnest possible lens. Besides high-index material, what frame choice helps most?
- For a progressive lens, insufficient seg/fitting height (frame too shallow) causes what problem?
- A patient reports objects appear tilted or the floor seems to slope with new glasses that have significant cylinder. This is most likely due to what?
- The vertical position for a general-wear D-segment bifocal is typically set at what landmark?
- Which combination is generally problematic when dispensing?