General第 118 / 120 题
Proper personal protective equipment when grinding or working with the battery includes:
a.Only gloves
b.Only a hat
c.No protection needed
d.Eye protection and appropriate gloves
解析
Eye protection guards against flying particles and battery acid, and gloves protect the hands from sharp edges and corrosive chemicals. Battery work also warrants care because of explosive hydrogen gas and acid. Safety equipment reduces the risk of injury.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- Technician A says a vehicle should be supported at the manufacturer's designated lift points. Technician B says rated jack stands should support a vehicle before working underneath it. Who is correct?
- Technician A says a dial indicator measures runout, endplay, and gear backlash. Technician B says it must be set up perpendicular to the surface for an accurate reading. Who is correct?
- A vehicle's service information (repair manual) is the best source for:
- If a bolt must be torqued to 90 foot-pounds and the specification then calls for an additional 90-degree turn, this method is known as:
- Converting a measurement, a technician knows there are 25.4 millimeters in one inch. A 2-inch dimension equals approximately:
- A feeler gauge is used to measure: