General第 120 / 120 题
A feeler gauge is used to measure:
a.The gap or clearance between two parts
b.Electrical current
c.Engine vacuum
d.Tire pressure
解析
A feeler gauge consists of thin metal blades of known thickness used to measure small gaps, such as valve lash or spark plug gap. The correct blade slides through the gap with a slight drag. It is a simple but precise clearance-measuring tool.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- Technician A says a vehicle should be supported at the manufacturer's designated lift points. Technician B says rated jack stands should support a vehicle before working underneath it. Who is correct?
- Technician A says a dial indicator measures runout, endplay, and gear backlash. Technician B says it must be set up perpendicular to the surface for an accurate reading. Who is correct?
- A vehicle's service information (repair manual) is the best source for:
- If a bolt must be torqued to 90 foot-pounds and the specification then calls for an additional 90-degree turn, this method is known as:
- Proper personal protective equipment when grinding or working with the battery includes:
- Converting a measurement, a technician knows there are 25.4 millimeters in one inch. A 2-inch dimension equals approximately: