Brakes (A5)第 57 / 120 题
A rear disc parking brake that will not hold is often caused by:
a.A misadjusted or seized parking brake mechanism/cable
b.Air in the front lines
c.A failed wheel-speed sensor
d.Low battery voltage
解析
Parking brake holding faults usually trace to cable stretch, misadjustment, or a seized caliper parking mechanism. Proper adjustment and lubrication restore holding force. On integral rear calipers, the internal actuator must function for both service and parking braking.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- During a disc brake job, a technician should measure rotor thickness and compare it to the:
- Technician A says brake shoes are used in disc brakes. Technician B says brake shoes are used in drum brakes. Who is correct?
- Technician A says a grinding, metal-on-metal noise during braking indicates friction material worn past its limit. Technician B says continued driving in that condition can score the rotor or drum. Who is correct?
- A brake caliper that sticks and does not release will most likely cause:
- The metering valve in a combination valve is used to:
- When bleeding a conventional hydraulic brake system, the general rule is to bleed: