Electrical (A6)第 72 / 120 题
In a wiring diagram, a component shown connected to ground provides:
a.The source of voltage
b.The return path for current back to the battery negative
c.Fuse protection
d.Signal amplification
解析
Ground is the return path that completes the circuit back to the battery's negative terminal. A poor ground raises resistance and causes dim lights, erratic operation, or feedback. Diagrams use ground symbols to trace current return paths.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- A starter that cranks slowly, with the battery known good and fully charged, most likely has:
- Power (watts) in an electrical circuit is calculated by:
- A parasitic (key-off) battery drain is measured by connecting an ammeter:
- Technician A says a fuse that blows again immediately after replacement indicates a short to ground or an overload. Technician B says repeatedly replacing the fuse will fix the circuit. Who is correct?
- Technician A says a diode allows current to flow in only one direction. Technician B says alternators use diodes to rectify AC into DC. Who is correct?
- Excessive AC ripple voltage measured at the battery with the engine running usually indicates: