Inspection第 28 / 60 题
What is the correct way to begin the air brake check for build-up rate in a dual air system?
a.Drain all the tanks completely first
b.With the engine at operating rpm, check that pressure builds from about 85 to 100 psi within about 45 seconds
c.Apply the parking brake and rev the engine
d.Disconnect the trailer air lines
解析
In a dual air system, with the engine at operating rpm, the pressure should build from about 85 to 100 psi within about 45 seconds. If air pressure does not build up fast enough, your pressure may drop too low during driving, requiring you to stop and wait to build air. Slow build-up indicates a problem to be fixed.
免费刷完整 60 道题库 — 无需注册。
同考点相关题目
- During a walk-around inspection, how do you check manual slack adjusters on S-cam brakes?
- When checking the air compressor during inspection, what should you look at if it is belt-driven?
- How do you test the low-pressure warning signal?
- At what pressure should the spring brakes come on automatically during the continued-air-loss test?
- How do you perform the static leakage (applied pressure) test on a straight truck with air brakes?
- For a single vehicle (straight truck), what is the maximum allowable air pressure loss in one minute with the brakes applied?