Inspection第 29 / 60 题
How do you test the low-pressure warning signal?
a.By draining the tanks while driving
b.By pulling on the slack adjusters
c.By turning the electrical power on and fanning off air until the warning activates
d.By revving the engine to build pressure
解析
With the key on and enough air in the system, step on and off the brake pedal to reduce tank pressure (this is called fanning off the air). The low air pressure warning signal must come on before the pressure drops below 60 psi. If it does not, the warning is faulty and must be repaired.
免费刷完整 60 道题库 — 无需注册。
同考点相关题目
- During a walk-around inspection, how do you check manual slack adjusters on S-cam brakes?
- When checking the air compressor during inspection, what should you look at if it is belt-driven?
- What is the correct way to begin the air brake check for build-up rate in a dual air system?
- At what pressure should the spring brakes come on automatically during the continued-air-loss test?
- How do you perform the static leakage (applied pressure) test on a straight truck with air brakes?
- For a single vehicle (straight truck), what is the maximum allowable air pressure loss in one minute with the brakes applied?