Load & Design第 11 / 110 题
In California, plans for new HVAC systems typically must demonstrate compliance with which energy standard?
a.The National Electrical Code
b.Title 24, Part 6 energy efficiency standards
c.The Uniform Plumbing Code
d.The Americans with Disabilities Act
解析
Title 24, Part 6 sets California's building energy efficiency standards, including HVAC equipment efficiency, duct sealing, and refrigerant charge verification. New and altered systems generally must show compliance through prescriptive or performance methods. Documentation is submitted with the permit application.
法律依据: California Energy Code (Title 24)免费刷完整 110 道题库 — 无需注册。
同考点相关题目
- After a Manual J load is calculated, which ACCA procedure is used to select the specific equipment model?
- Oversizing a residential air conditioner most commonly leads to which problem?
- Which factor increases a building's cooling load the most on a hot afternoon?
- Under the California Mechanical Code, when is a permit generally required for HVAC work?
- What is the primary purpose of a Manual J block load versus a room-by-room load?
- If a home has a calculated cooling load of 30,000 BTU/hr, what nominal equipment size is the closest match?