Installation第 25 / 110 题
Type B gas vent is designed to vent the products of combustion from which appliances?
a.Oil-fired only
b.Listed gas appliances with draft hoods or Category I equipment
c.Solid-fuel wood stoves
d.High-temperature incinerators
解析
Type B vent is a double-wall metal vent listed for venting listed gas appliances that produce relatively low-temperature, non-condensing flue gases, such as Category I furnaces. It must not be used with appliances that produce condensing or high-temperature flue products. Proper vent selection is required by the CMC.
法律依据: 2022 California Mechanical Code (CMC)免费刷完整 110 道题库 — 无需注册。
同考点相关题目
- What is the primary purpose of providing combustion air to a gas-fired furnace?
- When two combustion-air openings are used for an appliance in a confined space communicating with outdoors, they are generally located how?
- A high-efficiency condensing furnace (Category IV) is typically vented with what material?
- Why must condensate from a condensing furnace or cooling coil be routed to an approved drain?
- A secondary condensate drain pan or float switch is typically required when an air handler is installed where?
- When brazing refrigerant copper line sets, dry nitrogen is flowed through the tubing to accomplish what?