Fixtures & Water Heaters第 78 / 120 题
A showerhead is rated at the maximum allowable flow. A user showers for 8 minutes. Assuming the head flows at its rated maximum, how much water is used?
a.12.0 gallons
b.17.6 gallons
c.24.0 gallons
d.20.0 gallons
解析
The maximum showerhead flow rate is 2.5 gpm at 80 psi, and 2.5 times 8 minutes equals 20 gallons. 17.6 gallons would result from a 2.2 gpm lavatory faucet rate, which does not apply to showerheads. 12 gallons uses a 1.5 gpm rate and 24 gallons uses 3.0 gpm, neither of which is the code maximum for a shower.
法律依据: IPC §604.4免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- An indirect waste pipe from a commercial ice machine is 1-1/2 inches in diameter and discharges into a floor sink. What is the minimum required air gap?
- A 3/8 inch indirect waste tube from a beverage dispenser discharges over an open receptor. Applying the air gap rule, what is the required air gap?
- A laundry standpipe for a residential clothes washer is roughed in with the top of the standpipe 14 inches above the trap weir. Is the installation acceptable?
- A public restroom is fitted with metering faucets. What is the maximum volume of water each faucet may deliver per metering cycle?
- A closet flange is set on a wood subfloor before the finished tile is installed, and the installer plans to seal the closet to the flange. Which practice is correct?
- A restaurant installs a grease interceptor sized for 30 minutes of retention. If the connected fixtures produce a peak flow of 25 gallons per minute through the flow control device, what liquid capacity does the retention rule call for?