Transmission & Drivetrain (A2/A3)第 24 / 120 题
A vehicle has a final drive ratio of 3.73:1. This means the:
a.Wheels turn 3.73 times per driveshaft revolution
b.Driveshaft turns 3.73 times for each wheel revolution
c.Transmission has 3.73 forward gears
d.Engine turns at 3.73 percent of wheel speed
解析
A 3.73:1 final drive means the driveshaft (ring-and-pinion input) turns 3.73 times for every one revolution of the axle/wheel. A numerically higher ratio improves acceleration but raises cruising rpm. Ratio is found by dividing ring-gear teeth by pinion-gear teeth.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- A clicking noise from the front of a FWD vehicle that increases when turning sharply is most likely caused by:
- The differential in a rear axle allows:
- Technician A says a worn driveshaft U-joint can cause a clunk on acceleration. Technician B says it can cause a vibration that increases with vehicle speed. Who is correct?
- Technician A says most dipstick-equipped automatics are checked with the engine running at operating temperature. Technician B says fluid level is unaffected by temperature. Who is correct?
- Technician A says a slipping band or clutch pack can cause delayed or harsh shifts. Technician B says low line pressure can cause slipping and overheating. Who is correct?
- Excessive clutch pedal free play in a manual transmission can cause: