Transmission & Drivetrain (A2/A3)第 28 / 120 题
A gear ratio is calculated by dividing the number of teeth on the driven gear by the number on the drive gear. A drive gear with 12 teeth turning a driven gear with 36 teeth produces a ratio of:
a.3:1
b.1:3
c.4:1
d.2:1
解析
Dividing 36 driven teeth by 12 drive teeth gives a 3:1 reduction, meaning the drive gear turns three times for each output revolution. This multiplies torque while reducing speed. Understanding ratios is essential for diagnosing driveline gearing and speedometer calibration.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- A vehicle has a final drive ratio of 3.73:1. This means the:
- Technician A says most dipstick-equipped automatics are checked with the engine running at operating temperature. Technician B says fluid level is unaffected by temperature. Who is correct?
- Technician A says a slipping band or clutch pack can cause delayed or harsh shifts. Technician B says low line pressure can cause slipping and overheating. Who is correct?
- Excessive clutch pedal free play in a manual transmission can cause:
- A whining noise from an automatic transmission that changes with engine speed but is present in Park and Neutral most likely points to:
- The pilot bearing or bushing in a manual-transmission vehicle supports the: