Transmission & Drivetrain (A2/A3)第 30 / 120 题
The pilot bearing or bushing in a manual-transmission vehicle supports the:
a.Clutch release fork
b.Tip of the transmission input shaft
c.Flywheel ring gear
d.Throwout bearing
解析
The pilot bearing supports the front tip of the input shaft in the end of the crankshaft, keeping it centered. A worn pilot bearing causes noise and hard shifting, especially with the clutch depressed. It should be inspected or replaced whenever the clutch is serviced.
免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- A vehicle has a final drive ratio of 3.73:1. This means the:
- Technician A says most dipstick-equipped automatics are checked with the engine running at operating temperature. Technician B says fluid level is unaffected by temperature. Who is correct?
- Technician A says a slipping band or clutch pack can cause delayed or harsh shifts. Technician B says low line pressure can cause slipping and overheating. Who is correct?
- Excessive clutch pedal free play in a manual transmission can cause:
- A gear ratio is calculated by dividing the number of teeth on the driven gear by the number on the drive gear. A drive gear with 12 teeth turning a driven gear with 36 teeth produces a ratio of:
- A whining noise from an automatic transmission that changes with engine speed but is present in Park and Neutral most likely points to: