Wiring Methods & Materials第 75 / 120 题
A cable passes through a bored hole in a wood stud. If the edge of the hole is less than 1 and 1/4 inches from the nearest edge of the stud, what is required?
a.The cable must be rerouted through a notch instead
b.A steel plate or bushing at least 1/16 inch thick installed to protect the cable
c.A listed nonmetallic sleeve of any thickness
d.Nothing additional, provided the cable is Type MC
解析
When the required 1 and 1/4-inch setback cannot be maintained, a steel plate, sleeve or bushing at least 1/16 inch thick must cover the area of the wire so a drywall screw or nail cannot reach it. Notching is more damaging to the stud and creates the same exposure, and nonmetallic sleeves do not satisfy this rule.
法律依据: 2023 NEC §300.4(A)(1)免费刷完整 120 道题库 — 无需注册。
同考点相关题目
- At what maximum interval must Type AC cable be supported?
- What is the maximum support spacing for a 1-inch trade size rigid PVC conduit?
- What is the maximum total amount of bend permitted in one run of EMT between pull points?
- A pull box is used for a straight pull, and the largest raceway entering it is 3 inch trade size. What is the minimum required length of the box in the direction of the pull?
- An angle pull box has one 2-inch raceway and one 1-inch raceway entering the same wall, with conductors turning 90 degrees. What is the minimum distance from that wall to the opposite wall?
- How must liquidtight flexible metal conduit be secured on a normal run?