Sterilization第 47 / 100 题
What are the byproducts of a hydrogen peroxide gas plasma sterilization cycle, and what does this mean operationally?
a.Ethylene glycol and chlorohydrin, which require a long aeration phase
b.Formaldehyde and methanol, which require a chemical scrubber
c.Water vapor and oxygen, so no aeration period is required and items can be used immediately after the cycle
d.Ozone and nitrogen, which require ventilation of the room for one hour
解析
Hydrogen peroxide breaks down into water and oxygen, so there is no toxic residual and loads are available for immediate use, which is a major advantage over ethylene oxide. Ethylene glycol and ethylene chlorohydrin are ethylene oxide byproducts that drive its aeration requirement. Formaldehyde and ozone are separate sterilization agents, not plasma byproducts.
法律依据: AAMI ST79免费刷完整 100 道题库 — 无需注册。
同考点相关题目
- A surgeon sends a heat-sensitive device with a long narrow lumen and asks whether it can be processed with ethylene oxide. Which statement describes ethylene oxide sterilization?
- Why must every ethylene oxide load undergo an aeration phase before items are released?
- A tray wrapped in a cellulose-based (paper) wrapper is about to be loaded into a hydrogen peroxide gas plasma sterilizer. What is the problem?
- An ozone sterilization system is being introduced. Which statement about ozone sterilization is accurate?
- A department is deciding which sterilization method to use for a heat-stable stainless steel instrument set. Which method should be selected and why?
- A technician receives a jar of petroleum-based lubricant and a container of powder that must be sterilized. Which method applies, and what are representative parameters?