GeneralQuestion 119 of 120
Converting a measurement, a technician knows there are 25.4 millimeters in one inch. A 2-inch dimension equals approximately:
a.12.7 mm
b.2.54 mm
c.50.8 mm
d.254 mm
Explanation
Multiplying 2 inches by 25.4 mm/inch gives 50.8 millimeters. Being comfortable converting between metric and standard units is important because vehicles use both. Measuring tools and specifications may be given in either system.
Practice all 120 questions free — no signup required.
Related questions on this topic
- Technician A says a vehicle should be supported at the manufacturer's designated lift points. Technician B says rated jack stands should support a vehicle before working underneath it. Who is correct?
- Technician A says a dial indicator measures runout, endplay, and gear backlash. Technician B says it must be set up perpendicular to the surface for an accurate reading. Who is correct?
- A vehicle's service information (repair manual) is the best source for:
- If a bolt must be torqued to 90 foot-pounds and the specification then calls for an additional 90-degree turn, this method is known as:
- Proper personal protective equipment when grinding or working with the battery includes:
- A feeler gauge is used to measure:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against ASE Automobile Certification Series (A1–A8) · How we review