Electrical (A6)Question 78 of 120
A voltmeter is connected how, relative to the component being tested?
a.In series with the load
b.Between the two battery posts only
c.After removing the fuse
d.In parallel (across) the component
Explanation
A voltmeter is connected in parallel across the component or connection to measure the voltage difference, since it has very high internal resistance. An ammeter, by contrast, connects in series. Connecting a voltmeter in series would give an incorrect reading.
Practice all 120 questions free — no signup required.
Related questions on this topic
- Technician A says a diode allows current to flow in only one direction. Technician B says alternators use diodes to rectify AC into DC. Who is correct?
- Excessive AC ripple voltage measured at the battery with the engine running usually indicates:
- Technician A says a relay lets a small control current switch a larger load. Technician B says relays protect switches and allow smaller control wiring. Who is correct?
- Dim headlights that brighten when engine rpm increases most likely indicate:
- The gauge or module that displays engine coolant temperature relies on a sensor whose resistance:
- A circuit has 12 volts applied and draws 2 amps. Its total resistance is:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against ASE Automobile Certification Series (A1–A8) · How we review