Engine Performance (A8)Question 94 of 120
A diagnostic trouble code (DTC) of P0301 indicates:
a.A misfire detected in cylinder number 1
b.A lean condition on bank 1
c.A faulty coolant sensor
d.An EVAP leak
Explanation
P0301 is a cylinder-specific misfire code, with the last digit identifying cylinder 1. P0300 indicates a random/multiple-cylinder misfire. Causes include ignition, fuel, or mechanical (compression) problems in that cylinder.
Practice all 120 questions free — no signup required.
Related questions on this topic
- An oxygen (O2) sensor in the exhaust provides feedback to the PCM about:
- Technician A says a vacuum leak causes a rich condition. Technician B says a vacuum leak adds unmetered air and causes a lean condition, especially at idle. Who is correct?
- Technician A says a positive long-term fuel trim of +20 percent means the PCM is adding fuel to correct a lean condition. Technician B says positive trim means the engine is running rich. Who is correct?
- Technician A says a rich air-fuel mixture can raise tailpipe CO and HC. Technician B says the oxygen sensor helps the PCM keep the mixture near stoichiometric. Who is correct?
- Technician A says the MAF sensor measures the mass of air entering the engine so the PCM can meter fuel. Technician B says a dirty MAF can cause hesitation and fuel-trim errors. Who is correct?
- A P0420 code (catalyst efficiency below threshold) most often indicates:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against ASE Automobile Certification Series (A1–A8) · How we review