Finish TradesQuestion 266 of 700
A recessed ceiling light fixture is being covered by attic insulation as part of the finish. To avoid a fire hazard, the fixture must be:
a.Wrapped tightly regardless of its rating
b.Left with insulation piled directly on any fixture
c.Removed entirely
d.Rated IC (insulation contact) if insulation will touch it, or kept clear at the required distance if non-IC
Explanation
Only IC-rated recessed fixtures may be covered directly by insulation; a non-IC fixture must have insulation held back the required clearance to prevent overheating and fire. Wrapping any fixture, piling insulation on a non-IC can, or removing the fixture are wrong responses.
Practice all 700 questions free — no signup required.
Related questions on this topic
- A window unit has a glazed opening 4 feet wide by 5 feet tall in a room with 250 square feet of floor area. If the light requirement is 8 percent of floor area, does this single window meet it?
- When installing a skylight on a sloped roof, the head and side flashing should be integrated with the roofing so that:
- Batt insulation is installed in a 2x6 wall cavity behind drywall. To achieve its rated R-value, the batt must be:
- A new landscape irrigation system connects to the potable water supply. To protect drinking water from contamination, the system must include:
- On a residential site, finish grading around the building should generally slope AWAY from the foundation. A common minimum is a fall of about 6 inches within the first:
- A landscape retaining wall holds back soil. To relieve water pressure that could push the wall over, the builder should provide:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB General Building (B) Trade Examination · How we review