Framing & StructuralQuestion 347 of 700
What is the main purpose of a hold-down (tie-down) anchor at the end post of a narrow shear wall?
a.To resist the uplift/overturning tension generated at the wall end and anchor it to the foundation
b.To level the top plate
c.To provide gravity bearing for the roof
d.To seal the wall against air leaks
Explanation
A hold-down connects the end post (chord) of a shear wall to the foundation and resists the tension uplift that lateral load creates as the wall tries to overturn, which is critical on narrow walls with high overturning. Leveling, gravity bearing, and air sealing are not the hold-down's function.
Law Reference: 2025 CA Residential Code §R602.10.6.2Practice all 700 questions free — no signup required.
Related questions on this topic
- At the ends of a shear wall, why is blocking installed at horizontal panel joints in a 'blocked' shear wall?
- In a continuous load path for lateral loads, what is the main job of metal straps that connect wall framing across a floor level (stacked walls)?
- In a seismic retrofit of an older house with a raised foundation, what two upgrades are MOST commonly added to the cripple wall and sill to resist earthquake movement?
- A 'collector' or 'drag strut' in a lateral system does what?
- To transfer shear from a diaphragm or wall into the framing, the connection of sheathing to the boundary members depends MOST on which factor?
- Behind exterior cement plaster (stucco) applied over wood-based sheathing, how many layers of water-resistive barrier does the code generally require?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB General Building (B) Trade Examination · How we review