Framing & StructuralQuestion 442 of 700
For a conventional sill-plate anchor bolt set in a concrete foundation, what is the MINIMUM embedment depth of the bolt into the concrete?
a.4 inches
b.7 inches
c.10 inches
d.2 inches
Explanation
Anchor bolts must extend at least 7 inches into the concrete or grouted masonry to develop adequate holding strength. 4 inches and 2 inches are too shallow to resist uplift and shear reliably, while 10 inches exceeds the minimum and is not the code-required figure.
Law Reference: 2025 CA Residential Code §R403.1.6Practice all 700 questions free — no signup required.
Related questions on this topic
- In conventional roof framing, collar ties (or ridge straps) used to resist wind uplift and keep the ridge from separating are generally installed in what part of the attic space?
- A common rafter must span a horizontal run of 8 feet and rise a vertical height of 6 feet from the top plate to the ridge. Ignoring overhang, what is the approximate line length of the rafter?
- At the ends of a wood-framed shear wall, a hold-down device anchored to the foundation is installed primarily to resist which force?
- For a wood structural panel shear wall to develop its rated capacity, how must the panel edges be treated where sheets meet?
- Exterior wood siding, sheathing, or trim that is NOT preservative-treated or naturally durable must generally be kept at least how far above exposed earth?
- On a wood-framed wall receiving exterior cement plaster (stucco), a weep screed must be installed at the base of the wall at a MINIMUM of how high above adjacent earth and above paved surfaces?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB General Building (B) Trade Examination · How we review