SafetyQuestion 564 of 700
A contractor's crews routinely cut, grind, and drill concrete, creating respirable crystalline silica. Beyond dust controls, what written program does Cal/OSHA require?
a.A daily equipment rental log
b.A traffic control plan
c.A written exposure control plan identifying tasks and the controls used
d.No written program is required if masks are worn
Explanation
Employers with silica exposure must maintain a written exposure control plan that identifies the tasks creating exposure, the engineering controls, work practices, and respiratory protection used for each. Option a and b are unrelated documents. Option d is wrong because a written plan is required regardless of respirator use. The plan ensures controls are planned and consistently applied, not improvised.
Law Reference: Cal/OSHA Title 8 §1532.3Practice all 700 questions free — no signup required.
Related questions on this topic
- A straight (non-self-supporting) ladder is set up against a wall. What placement BEST follows the recommended angle for safe use?
- A supported scaffold platform is more than 7.5 feet above the lower level. Which practice BEST meets Cal/OSHA fall-protection requirements for workers on the platform?
- A load is lifted with a two-leg sling. As the angle between the sling legs and the load becomes smaller (the legs spread wider), what happens to the tension in each leg?
- Before a worker is required to wear a tight-fitting respirator on the job, what does Cal/OSHA require FIRST?
- At the end of the day, a crew must clean up concrete dust that contains silica. Which housekeeping method is BEST to limit worker exposure?
- A worker must clear a jam inside a powered concrete mixer. What is the BEST practice to prevent the machine from starting during the work?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB General Building (B) Trade Examination · How we review