SafetyQuestion 568 of 700
On a construction site, what are the TWO commonly accepted ways to protect workers from ground faults when using temporary power for hand tools?
a.Extension cords rated for indoor use, and duct tape on splices
b.Longer cords, and painting the cords a bright color
c.Ground-fault circuit interrupters (GFCIs), or an assured equipment grounding conductor program
d.Only turning tools off between uses
Explanation
Cal/OSHA accepts either GFCI protection on receptacles and cords, or a documented assured equipment grounding conductor program with regular inspection and testing, to guard against electric shock from ground faults. Option a and b describe unsafe or irrelevant practices. Option d does nothing about a fault while the tool is in use. Either GFCIs or an assured grounding program (ideally GFCIs) must be in place for temporary power.
Practice all 700 questions free — no signup required.
Related questions on this topic
- Before a worker is required to wear a tight-fitting respirator on the job, what does Cal/OSHA require FIRST?
- At the end of the day, a crew must clean up concrete dust that contains silica. Which housekeeping method is BEST to limit worker exposure?
- A worker must clear a jam inside a powered concrete mixer. What is the BEST practice to prevent the machine from starting during the work?
- Noise monitoring shows workers are exposed to an average of 88 dBA over an 8-hour shift. Beyond providing hearing protection, what is the employer generally required to establish?
- On a 55 mph roadway you must close a lane and shift traffic 12 feet. Using the merging taper formula L equals W times S for speeds of 45 mph and above (L in feet, W in feet, S in mph), what is the MINIMUM taper length?
- A flagger controls traffic at a work zone on a city street. Which practice BEST follows California MUTCD flagging guidance?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB General Building (B) Trade Examination · How we review