Core TradesQuestion 6 of 700
Which curing method retains moisture in fresh concrete by forming a sealing film on the surface after finishing?
a.Ponding water on top of a flat slab
b.Covering the surface with continuously wet burlap
c.Fogging the surface with a fine water spray
d.Spraying a liquid membrane-forming curing compound
Explanation
A liquid membrane-forming compound leaves a thin film that seals in mix water so hydration continues. Ponding, wet burlap, and fogging all cure by adding external water rather than sealing the surface.
Law Reference: 2025 CA Building Code (CBC) Chapter 19 (Concrete)Practice all 700 questions free — no signup required.
Related questions on this topic
- During hot-weather placement with a long haul time, a set-retarding admixture is used mainly to:
- The PRIMARY purpose of an isolation (expansion) joint around a column or against an existing wall in a slab-on-grade is to:
- A construction joint in a concrete structure is BEST described as:
- A No. 5 reinforcing bar has a nominal diameter of 5/8 inch. If the specified tension lap splice is 40 bar diameters, what is the MINIMUM lap length?
- For a typical residential interior slab-on-ground, what is a common MINIMUM slab thickness?
- When placing concrete in cold weather, fresh concrete must generally be protected from freezing until it reaches a compressive strength of at least about:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB General Building (B) Trade Examination · How we review