SafetyQuestion 427 of 521
Crossing the restricted approach boundary toward an exposed energized part requires:
a.No special precautions because it is close to the equipment
b.Only safety glasses
c.A hard hat and nothing else
d.A qualified person, a documented plan/energized work permit, and appropriate shock PPE such as voltage-rated gloves
Explanation
The restricted approach boundary is close to the live part, where an increased risk of shock from inadvertent movement exists. Only a qualified person may cross it, and only with a plan/permit and shock PPE (e.g., rated gloves). Glasses or a hard hat alone are inadequate for the shock hazard at that distance.
Law Reference: NFPA 70EPractice all 521 questions free — no signup required.
Related questions on this topic
- What is the difference between a Class A (personnel) GFCI and a 30-milliampere 'equipment' ground-fault protection device?
- The arc flash boundary is best defined as the distance at which:
- In NFPA 70E, the 'limited approach boundary' is best described as:
- An arc-flash study shows an available incident energy of 8 cal/cm² at the working distance. The arc-rated clothing and PPE must have an arc rating of:
- Rubber insulating gloves used for energized work on a 480V system must be:
- Under Cal/OSHA and NFPA 70E, the primary/preferred way to protect workers from electrical hazards is to:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-10 Electrical Trade Examination · How we review