SafetyQuestion 466 of 521
Which equipment, when likely to require examination or servicing while energized, must be field- or factory-marked to warn of potential arc-flash hazards?
a.Residential 15-ampere receptacles
b.Only equipment operating above 1,000 volts
c.Household doorbell transformers
d.Switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers in other than dwelling units
Explanation
The Code requires arc-flash hazard marking on switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers in other than dwellings likely to be worked on energized. Small residential receptacles and doorbell transformers are not the targeted equipment, and the requirement is not limited to over 1,000V.
Law Reference: 2023 NEC §110.16Practice all 521 questions free — no signup required.
Related questions on this topic
- Electrocution is one of OSHA's construction 'Focus Four' hazards. The other three are:
- An unqualified worker must walk past an open 480V panel with exposed live parts to reach a work area. What must happen?
- An arc-flash hazard warning label applied to equipment should list information such as:
- When working within the restricted approach boundary of exposed energized parts, hand tools should be:
- To protect other workers from an area where justified energized work is being performed, the qualified person should:
- Class 00 and Class 0 rubber insulating gloves are rated for maximum AC use voltages of approximately:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-10 Electrical Trade Examination · How we review