Services & DistributionQuestion 95 of 521
A grounded (neutral) service conductor larger than 6 AWG is permitted to be identified by:
a.Green tape at both ends
b.No identification at all
c.Orange marking
d.A continuous white outer finish, or by white/gray marking (such as tape) encircling the conductor at terminations and accessible points
Explanation
Per 200.6(B), grounded conductors larger than 6 AWG may be identified either by a continuous white or gray outer finish, or by distinctive white/gray marking (like tape or paint) at terminations at the time of installation. Green identifies equipment grounding, and leaving it unmarked or orange (high leg) is incorrect.
Law Reference: 2023 NEC §200.6Practice all 521 questions free — no signup required.
Related questions on this topic
- A feeder is the main power feeder to a single dwelling and carries the entire load. What allowance does the dwelling feeder provision give for sizing this conductor?
- As a general rule, each service drop or service lateral is permitted to supply:
- Six current-carrying conductors are installed in a single raceway. The ampacity adjustment factor that must be applied to each conductor is:
- Where a service has two to six service disconnects for a single service, they must be:
- The minimum depth of working space in front of a 208Y/120 V panelboard (0-150 V to ground, Condition 1: exposed live parts on one side, no live or grounded parts on the other) is:
- When a panelboard is used as service equipment, the main bonding jumper must be:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-10 Electrical Trade Examination · How we review