Service & TroubleshootingQuestion 87 of 110
A capacitor that reads well below its rated microfarad value should be treated how?
a.Left in service
b.Replaced with one of the correct rating
c.Charged with refrigerant
d.Bypassed with a jumper
Explanation
A capacitor measuring significantly below its labeled microfarad rating is weak and cannot deliver the needed phase shift, causing hard starting, overheating, and high amp draw. It should be replaced with a capacitor of the same voltage and microfarad rating. Never bypass a required capacitor.
Practice all 110 questions free — no signup required.
Related questions on this topic
- A furnace that heats briefly then shuts off repeatedly before satisfying the thermostat is exhibiting what?
- A dirty flame sensor on a modern furnace most commonly causes what symptom?
- When measuring the actual airflow of an installed system, which measurement helps diagnose a restrictive duct system?
- Recommended routine maintenance to preserve airflow and efficiency includes what?
- A technician measuring compressor amp draw far above the rated load amps (RLA) should suspect what?
- The most likely cause of no cooling when the thermostat calls but the outdoor unit is completely silent is what?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-20 Warm-Air HVAC Trade Exam · How we review