IrrigationQuestion 5 of 100
A reduced pressure principle (RP) backflow assembly is primarily used to protect a potable water supply against what?
a.Low water pressure only
b.Both backsiphonage and backpressure, including high-hazard contamination
c.Freezing temperatures
d.Excess flow velocity
Explanation
An RP assembly is the highest level of mechanical backflow protection and guards against both backsiphonage and backpressure, making it suitable for high-hazard cross-connections. Irrigation systems using fertilizer or chemical injection are considered high hazard and typically require an RP device. It uses two check valves and a relief valve between them.
Practice all 100 questions free — no signup required.
Related questions on this topic
- Precipitation rate for a sprinkler zone is calculated using which formula?
- A zone has four heads each using 3 GPM covering a total area of 400 square feet. What is the approximate precipitation rate?
- Under California's Model Water Efficient Landscape Ordinance (MWELO), overhead spray irrigation is generally prohibited in landscape areas narrower than what width?
- A pressure vacuum breaker (PVB) must be installed at what minimum height relative to the highest downstream sprinkler head or outlet?
- An atmospheric vacuum breaker (AVB) has which key installation limitation?
- Water hammer in an irrigation system is BEST reduced by which measure?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-27 Landscaping Trade Exam · How we review