Surface PreparationQuestion 1 of 100
Before repainting a previously painted, chalky exterior stucco wall, what is the FIRST thing a painter should do to ensure adhesion?
a.Apply two finish coats without priming
b.Wash the surface to remove chalk, dirt, and loose material
c.Sand the stucco smooth with 220-grit paper
d.Spray a heavy fog coat of the finish color
Explanation
Chalk and surface contamination prevent a new coating from bonding. Washing (often with a pressure washer or detergent solution) removes the chalky residue and dirt so the primer or paint can adhere. Painting over an unwashed chalky surface commonly leads to peeling.
Practice all 100 questions free — no signup required.
Related questions on this topic
- What is the primary purpose of caulking gaps around window trim before painting?
- When patching a small nail hole in interior drywall, which sequence is correct?
- Under the EPA Renovation, Repair and Painting (RRP) Rule, work that disturbs painted surfaces in housing built before which year generally triggers lead-safe requirements?
- Which work practice is REQUIRED by the EPA RRP Rule when disturbing lead-based paint in a pre-1978 home?
- What causes efflorescence, the white crystalline deposit sometimes seen on masonry and concrete?
- Before painting new bare wood trim, why is sanding in the direction of the grain important?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-33 Painting & Decorating Trade Exam · How we review