Surface PreparationQuestion 21 of 100
When dry-cutting or grinding concrete during prep generates dust, what airborne hazard is of concern under Cal/OSHA?
a.Lead only
b.Asbestos only
c.Respirable crystalline silica
d.Carbon monoxide
Explanation
Cutting, grinding, or abrading concrete and masonry releases respirable crystalline silica, which can cause silicosis. Cal/OSHA requires engineering controls such as water suppression or vacuum dust collection and, when needed, respiratory protection. This applies to prep work as well as demolition.
Law Reference: Cal/OSHA Title 8Practice all 100 questions free — no signup required.
Related questions on this topic
- Knots and sap streaks in bare softwood can bleed through paint unless they are sealed with what?
- Why should exterior wood be checked for moisture content before painting?
- What is 'feathering' when preparing a spot repair on a painted surface?
- Before applying an elastomeric coating to a stucco crack, what prep step is typically needed?
- Why is it important that a masonry surface be fully cured before painting with most coatings?
- A previously painted surface shows widespread peeling down to bare wood. What does this MOST likely indicate?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-33 Painting & Decorating Trade Exam · How we review