ApplicationQuestion 68 of 100
A specification calls for 5 mils wet film thickness. Which tool confirms this during application?
a.A wet-film thickness gauge (comb)
b.A moisture meter
c.A caliper on the dried paint
d.A pressure gauge on the sprayer
Explanation
A wet-film thickness gauge, often a notched comb, is pressed into the fresh coating to read the wet mils applied. This lets the painter adjust technique in real time to hit the target and, with the solids content, the required dry film. Dry film gauges are used after curing to verify final thickness on metal.
Practice all 100 questions free — no signup required.
Related questions on this topic
- Why should each coat be allowed to dry for the manufacturer's recommended recoat time before the next coat?
- What is 'cutting in' when painting a room?
- Why is adequate ventilation and lighting important during interior application?
- What commonly causes 'brush marks' (ridges) to remain in a dried brushed finish?
- For an oil-based enamel on trim, which brush type is generally preferred?
- Why should airless spray tips be selected based on the coating and orifice size/fan width?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-33 Painting & Decorating Trade Exam · How we review