SafetyQuestion 345 of 360
Before starting to braze pipe with a torch in an occupied building, what must be immediately available at the hot-work location?
a.A second torch as a backup
b.A can of flux only
c.Nothing special is required for brazing
d.A suitable fire extinguisher (and/or charged hose) ready for immediate use
Explanation
Cal/OSHA hot-work rules require appropriate fire-extinguishing equipment, such as a suitable portable fire extinguisher or charged hose, to be present and ready for instant use whenever open-flame or spark-producing work is done. The equipment must match the likely fire type and be maintained. Having it steps away, not across the building, can stop a small ignition from becoming a structure fire.
Law Reference: Cal/OSHA Title 8 §4848Practice all 360 questions free — no signup required.
Related questions on this topic
- After installing a reduced-pressure backflow assembly on a commercial water service, what ongoing requirement protects the public water supply?
- The most common cross-connection in a home is an outdoor hose faucet, where a hose can be left in a pool, sink, or chemical bucket. What inexpensive device protects against backsiphonage there?
- A plumber uses an open flame to solder copper joints near wood framing inside a wall cavity. After finishing the hot work, what fire-safety step is required?
- A plumber is sweating copper joints on a potable water line. To protect public health, what kind of solder must be used on drinking-water piping in California?
- A plumber is brazing a joint on a fitting that may be cadmium-plated in a small, poorly ventilated mechanical room. What is the primary hazard and control?
- Before hot work in an area with combustible materials on the floor, what is the recommended practice for those combustibles?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB C-36 Plumbing Trade Examination · How we review