Radiation Health & SafetyQuestion 18 of 100
Compared with D-speed film, direct digital sensors generally allow the operator to:
a.Reduce patient exposure time substantially while still obtaining a diagnostic image
b.Skip the lead apron because sensors emit no radiation
c.Use a higher kVp to compensate for the sensor's low sensitivity
d.Eliminate the need for a beam-alignment device
Explanation
Direct digital sensors are more sensitive than D-speed film, so exposure times and patient dose can be reduced considerably. Sensors do not emit radiation, but the x-ray beam still does, so shielding recommendations remain unchanged. Sensors are highly sensitive rather than insensitive, and beam-alignment devices are still needed to prevent cone cuts and angulation errors.
Practice all 100 questions free — no signup required.
Related questions on this topic
- Which group of tissues is considered MOST radiosensitive and therefore of greatest concern during dental radiography?
- Ionization occurs in tissue when:
- A receptionist who never operates x-ray equipment sits at a desk near the operatory wall. Which annual dose limit applies to her?
- Aluminum filtration is placed in the path of the x-ray beam in order to:
- According to the inverse square law, if the distance from the x-ray source to the receptor is doubled, the beam intensity at the receptor becomes:
- Most radiation damage in soft tissue happens indirectly. Which mechanism explains this indirect effect?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against DANB Radiation Health & Safety (RHS) + Infection Control (ICE) Exams · How we review