Type I — Small AppliancesQuestion 92 of 240
During recovery from a small appliance with a working compressor, a technician can only reach 82% recovery before the unit stops pulling down. What should the technician do to comply?
a.Stop, because 82% already exceeds the 80% minimum for this case
b.Continue with self-contained equipment until at least 90% is recovered or 4 inches Hg vacuum is reached
c.Vent the remaining refrigerant since it is below 5 pounds
d.Recover only to 75% and record it as complete
Explanation
With the compressor operating, the required recovery level for a small appliance is 90%, not 80%, so 82% is not enough. The technician should keep recovering with self-contained equipment until 90% is achieved or the alternative 4 inches Hg vacuum is reached. Venting any remaining refrigerant is prohibited regardless of the small charge.
Law Reference: 40 CFR §82.156Practice all 240 questions free — no signup required.
Related questions on this topic
- A technician needs to access the sealed system of a household refrigerator that has no service valve. What tool is commonly used to gain temporary access for recovery?
- A technician wants to speed up refrigerant recovery from a chest freezer by heating the compressor with a torch and rapping the tubing with a hammer. Which statement is correct?
- System-dependent (passive) recovery equipment may be used on which of the following?
- A shop buys a new recovery machine to service small appliances. Recovery equipment manufactured after November 15, 1993 must meet which requirement?
- A technician removes a bolt-on piercing valve after finishing recovery on a refrigerator. Why is leaving a piercing valve on the system long-term discouraged?
- While servicing a dehumidifier, a technician accidentally releases a small amount of refrigerant into the room. Which statement reflects the Section 608 venting prohibition?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against EPA Section 608 Technician Certification Exam · How we review