Decontamination第 17 / 100 题
A new sterile processing department is being designed. Which statement describes correct workflow?
a.Work flows in one direction only, from soiled receiving through decontamination to clean assembly, sterilization, and storage
b.Clean and soiled items may share a corridor as long as they travel at different times of day
c.Staff may move freely between decontamination and assembly as long as gloves are changed
d.Sterilizer loading may occur from either the clean or the soiled side depending on staffing
解析
Unidirectional flow with physical separation between soiled and clean areas is the fundamental design principle that prevents recontamination of processed items. Time separation on a shared corridor does not remove residual contamination or airborne risk. Moving between areas requires full removal of protective attire and hand hygiene, not just a glove change, and sterilizers are always loaded from the clean side.
法律依据: AAMI ST79免费刷完整 100 道题库 — 无需注册。
同考点相关题目
- A technician is scrubbing a hinged instrument with a brush at the decontamination sink and is spraying water droplets into the air. What is the correct technique?
- What is the purpose of the elevated-temperature rinse phase, often around 180 degrees F or higher, in a washer-disinfector cycle?
- A department is writing its quality plan and must set a frequency for cleaning verification testing of its mechanical washers. What should the plan specify?
- Soiled instruments must be transported from the operating room to the decontamination area on a different floor. What is required?
- A decontamination area is equipped with three sinks. What is the intended use of each?
- A lumened suction instrument arrives in decontamination. Which cleaning practice is correct?