GeneralQuestion 111 of 120
An outside micrometer is used to measure:
a.Torque on a fastener
b.Electrical resistance
c.Precise outside dimensions such as shaft or rotor thickness
d.Coolant temperature
Explanation
An outside micrometer measures external dimensions to a thousandth of an inch or finer, such as a rotor or crankshaft journal. The reading combines the sleeve and thimble scales. Proper technique and calibration are essential for accuracy.
Practice all 120 questions free — no signup required.
Related questions on this topic
- A torque wrench is used to:
- Technician A says wheel lug nuts can be tightened in any order. Technician B says they should be tightened in a crisscross (star) pattern to the specified torque. Who is correct?
- Technician A says a vehicle should be supported at the manufacturer's designated lift points. Technician B says rated jack stands should support a vehicle before working underneath it. Who is correct?
- Technician A says a dial indicator measures runout, endplay, and gear backlash. Technician B says it must be set up perpendicular to the surface for an accurate reading. Who is correct?
- A vehicle's service information (repair manual) is the best source for:
- If a bolt must be torqued to 90 foot-pounds and the specification then calls for an additional 90-degree turn, this method is known as:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against ASE Automobile Certification Series (A1–A8) · How we review