GeneralQuestion 112 of 120
A torque wrench is used to:
a.Tighten fasteners to a specified value
b.Measure bore diameter
c.Test battery voltage
d.Check tire tread depth
Explanation
A torque wrench applies a controlled, specified amount of tightening force so fasteners are neither loose nor overtightened. Proper torque is critical for head bolts, wheels, and many other parts. The wrench should be set back to its lowest setting when stored to preserve calibration.
Practice all 120 questions free — no signup required.
Related questions on this topic
- An outside micrometer is used to measure:
- Technician A says wheel lug nuts can be tightened in any order. Technician B says they should be tightened in a crisscross (star) pattern to the specified torque. Who is correct?
- Technician A says a vehicle should be supported at the manufacturer's designated lift points. Technician B says rated jack stands should support a vehicle before working underneath it. Who is correct?
- Technician A says a dial indicator measures runout, endplay, and gear backlash. Technician B says it must be set up perpendicular to the surface for an accurate reading. Who is correct?
- A vehicle's service information (repair manual) is the best source for:
- If a bolt must be torqued to 90 foot-pounds and the specification then calls for an additional 90-degree turn, this method is known as:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against ASE Automobile Certification Series (A1–A8) · How we review