Core TradesQuestion 177 of 700
In a dwelling, GFCI protection is generally required for 125-volt receptacles installed in which of the following locations?
a.Only in unfinished basements
b.Only in bedrooms
c.Only where a swimming pool is present
d.Bathrooms, kitchens serving countertops, garages, and outdoor locations
Explanation
The Electrical Code requires GFCI protection in wet or damp areas such as bathrooms, kitchen countertop receptacles, garages, and outdoors, where shock risk is highest. Bedrooms are covered by arc-fault, not ground-fault, protection, and GFCI is required in many more places than just pools or basements.
Law Reference: 2025 CA Electrical Code, Article 210 (GFCI protection)Practice all 700 questions free — no signup required.
Related questions on this topic
- Rebar chairs and bar supports are used during concrete placement PRIMARILY to:
- When selecting the maximum size of coarse aggregate for reinforced concrete, a common limit is that the aggregate should NOT exceed:
- A water-reducing admixture is added to a concrete mix PRIMARILY to:
- Under typical residential conditions, a 14 AWG copper conductor is generally protected at a MAXIMUM overcurrent device rating of:
- In a service panel, the main bonding jumper serves PRIMARILY to:
- In a dwelling kitchen, what is the MINIMUM number of 20-ampere small-appliance branch circuits required to serve the countertop receptacle outlets?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB General Building (B) Trade Examination · How we review