Core TradesQuestion 186 of 700
In a seismic region, a tank-type water heater must generally be secured against movement with a MINIMUM of:
a.Two straps, one in the upper third and one in the lower third of the tank
b.One strap at the base only
c.A single strap at the middle of the tank
d.Adhesive pads under the tank feet
Explanation
Codes in seismic areas require at least two straps, placed in the upper and lower thirds of the tank, to keep it from tipping and shearing gas or water lines during an earthquake. A single strap or base-only strap allows the top to swing, and adhesive pads are not adequate restraint.
Law Reference: 2025 CA Plumbing Code, Chapter 5 (Water Heaters)Practice all 700 questions free — no signup required.
Related questions on this topic
- When a driven ground rod is used as a grounding electrode, what is the MINIMUM length that must be in contact with the soil?
- Ampacity derating (adjustment) for bundled conductors generally begins to apply once a raceway or cable contains MORE than how many current-carrying conductors?
- Limiting the developed length of a fixture's trap arm (the distance from the trap to its vent) is important PRIMARILY to:
- A common device required on an outdoor hose bibb to prevent contaminated water from being drawn back into the potable supply is a:
- When the static water pressure supplied to a building exceeds what value, a pressure-reducing valve is generally required?
- A 4-inch horizontal building drain runs 48 feet at a minimum slope of 1/8 inch per foot. What is the total fall over that run?
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB General Building (B) Trade Examination · How we review