Core TradesQuestion 49 of 700
In a basic (non-high-wind) zone, standard asphalt shingles are typically fastened with a MINIMUM of how many nails per shingle?
a.2 nails
b.4 nails
c.5 nails
d.6 nails
Explanation
Standard three-tab shingles normally require at least 4 fasteners per shingle in basic wind areas. Two nails is insufficient, while 5 or 6 nails are used only in high-wind zones or with specific manufacturer requirements.
Law Reference: 2025 CA Residential Code (CRC) R905.2.6 (Fasteners)Practice all 700 questions free — no signup required.
Related questions on this topic
- An enclosed attic has 1,500 square feet of area. Using the 1/150 rule with no vapor retarder, what MINIMUM net free ventilating area is required?
- A roof has 3,150 square feet of surface to cover. Including a 10 percent allowance for waste and hips, how many roofing squares of material should be ordered?
- At the rake (gable) edge of a shingle roof, the drip edge should be installed:
- A simple gable roof covers a building 24 feet by 40 feet in plan. At a 6:12 pitch (slope factor 1.118), what is the approximate total roof surface area?
- In differential leveling, a 'backsight' reading is taken on:
- A 'balanced' grading design PRIMARILY seeks to:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against California CSLB General Building (B) Trade Examination · How we review